[Risolto] fb 7362 sl problem uploading international firmware

[olujnik]

I have tried to get international firmware to 7362 sl because i wont to change from annex b to annex a but rukernel is giving me a message that it is not design to work with fritz.box 7362 sl and ftp up-loader is stuck and cannot make connection
I am having feeling that something is wrong whit my lan card, after turning 7362 off, and then on lan card is showing no connection.

Any suggestion is welcomed

[Naf]

First of all you have to present yourself in this section as forum rules and then ask for your problem.

The 7362 sl has no original international firmware, in our repository there is a mod and just update via interface fritz as a regular update. I do not know what you tried to install to find yourself in this situation and still you can download the avm German Recovery to recover your box and then install our mod firmware via web interface of the fritz. Remember to enable expert mode first.

[olujnik]

My apologies, I am from serbia, and I have FB 7170 which served very well last two years. Ten days ago I got FB 7362 sl from friend from Germany. Serbia is using annex a and Fb 7362 sl is annex b so I decided to try to change it.
I have flashed FB 7170 with rukernel and I thought that it will be the same, but I have problem.
Rukernel is giving me a message that he cannot work whit my fb 7362 sl,
"Die Hardware "203" bzw. die "Fritz!box Fon WLAN 7362SL" kann derzeit mit dem ruKernelTool noch nicht geflasht werden!"

I have tried to flash with ftpUpload but it is geting stuck after I change ip address to 192.168.178.1 and set subnet mask to 255.255.0.0 and it cannot connect to 7362 sl.
My pc is win 7 x64, and 7362sl has fb os 6.20
which program to use for flashing fb, I have found firmare on this site that is wy i am asking for help

[Naf]

Download the recovery from avm link in my 2° message and set your lan as:

Codice:

IP address 192.168.178.20
Netmask: 255.255.255.0
Gateway 192.168.178.1
Primary Dns 192.168.178.1

And use the recovery to getg back your box to German and then update our mod firmware from web interface of fritz.box.

[olujnik]

restored German 6.20 and and installed int 6.20 from expert mod but fb 7362 sl is after install in loop power led blinks about 30 s and then it restarts (all light are powered - first and last are orange)
from time to time lan card is trying to connect to modem but it is disconnected after 5 to 10 sec

[Naf]

Something went wrong, however, resets the network card as in my 4th message and then log in FTP  and set it so:

Codice:

quote SETENV firmware_version avme

press enter

Codice:

quote REBOOT

press enter.

[olujnik]

It is working!!! Thank you
You are the best

[Naf]

You're welcome.

[zeljko2]

Hello everyone.
Do not open a new topic. I have the same problem as "olujnik" but I can not solve it.
From the menus I made the upgrade from version 6.03 to version 6.20 with many languages. After upgrading will not boot only flashes power lamp and after a minute to reboot. They did not understand about ftp access. How to send commands "quote SETENV firmware_version avme" and "reboot"?
Thank you for your help.

[graymalking]

To enter to ftp control you have to follow next points:
1) set pc's
IP 192.168.178.10
SUBNET        255.255.255.0
GATEWAY       192.168.178.1
DNS 192.168.178.1
2) connect fritz box to pc by lan1
3) switch off fritz box electric connection
4) open your pc DOS prompt and type  
ftp 192.168.178.1 without press enter
5) switch on fritz box electric connection and after 2 seconds press enter to ftp dos command
6) if all is gone well you can se the ftp user request otherwise retry points from 3 to 5
7) type adam2 as user and adam2 as password

Now you are ready to send commands "quote SETENV firmware_version avme"

[zeljko2]

Thank graymalking.
I solved the problem according to your instructions. Everything works.
Hi!

[zeljko2]

Dear graymalking and other experts.
After I successfully solved the previous problem appeared to others.
I never managed to put in the work of VoIP T-Com Croatia. I tried to make recovery to version 6.03 and try the original German version of 6.20, but my message displays the firmware is incompatible. How to solve the problem with the recovery. This with orders over ftp I learned, but I do not know to work with rukerneltool,
Thank you.

[graymalking]

Point 1
I dont understand what do you mean as " I never managed to put in the work of VoIP T-Com Croatia". Do you mean that you are not able to connect your adsl with this provider ?
Remember that German firmware works only with annex B while in international firmware you can choose between annex A or annex B system.
I dont know wich kind of annex do you use in Croatia but are you sure that you dont miss any provider setting?

Point 2: it is normal that "the original German version of 6.20, but my message displays the firmware is incompatible" becouse of you have set:
...quote SETENV firmware_version avme (international fw)
to use German version you have to set
..quote SETENV firmware_version avm (german fw)

[zeljko2]

Croatian Telecom (T-Com) working at Annex B. I have established an internet connection, but can not establish Internet telephony (VoIP). The goal is to restore the original version 6.03 and then upgrade to 6.20 and set up VoIP.
After starting FRITZ.Box_7362_SL.06.03.recover-image.exe the message "firmware is not compatible" and not to allow recovery.

[graymalking]

Ok, the problem is what do tou mean as original version
Is it the German Version or a TCOM croatian version ?
If T-Com has made private fw with own voip date it is very hard to restore.
If the problem is to restore the original version you have to set by ftp avm setting

>>quote SETENV firmware_version avm

and then use the german recovery file

Added: If adsl connection works and Voip does not work I dont think that the problem is to update fw but to find the right croatian voip setting

[zeljko2]

Hi!
Before you send the message I tried to command quote SETENV firmware_version avm and succeeded, after which I returned to the German version 6.03.
Croatian T-Com does not have a version already using original firmware. I have all the settings and password for VoIP but it will not register. Internet normally works. It is a state with version 6.03. I will also try to upgrade to 6.20, but I doubt it.

[graymalking]

I dont think it is a fritzbox problem, you can try to use a pc sip software as xlite (http://www.counterpath.com/x-lite/) and use the croatian voip setting to see if the registration works, but maybe it is better if you contact T-com to resolve the problem.

[zeljko2]

Thank you for your help.
I solved the problem by earlier instructions.
Best regards

[pegede]

Hello Naf (and others)

I found this forum and your great contributions by searching for a way to switch the Annex of an 7362 SL with FritzOS 06.30 to A. I know how to modify Firmwares using freetz and have already found out that FW 06.30 contains both Annex A&B drivers. Since I don't require an English UI, I am seeking only for a hint how to modify this FW to make the Annex A driver the active one. Any input from you would be highly appreciated!

I have already tried accessing the box by ftp (telnet no longer possible since 06.30) after reboot and issued the commands
quote SETENV annex A
quote SETENV kernel_args annex=A

but when I look in the DSL section afterwards, it still shows the same DSL driver version: 1.100.133.6.  If it had been successfully switched to Annex A, shouldn't the version no. be different?

Saluti dalla Germania,
pegede

[Contenuto sponsorizzato]